80s Retro TV Minis

02.22.2021

This latest batch looks to have a lot more stuff than when I normally post an update, but the majority of what's included didn't take much work.

The minis were a flashback to the 80s thanks to Studio Miniatures. First up are not Crocket and Tubbs, from Miami Vice, with their white shoes. After that are not the A-Team. I've got to admit, I had fun with not Mr T when painting these up. I used less (maybe no) washes on the clothes on this batch. My washes tend to over-shadow and darken all of the clothes, which I didn't want on these. As such, I played it safe.

During some down time during the week, it was too cold and snowy to seal the above minis or prime whatever the next batch was going to be, so I dug out some little MDF kits and put them together. From Christmas 2019 (maybe 2018) was the 4Ground playground pieces Keith got for me. It took all of about 10 minutes to punch and glue together the swing set and see-saw (or is it a teeter-totter?). Afterwards I added in some grass flocking since these will likely end up in neighborhood back yards instead of an urban playground. The light poles came from Sarissa Precission, and are close to the same quality as the plastic light poles I've gotten in the past, but much more affordable! After the fact, I saw that the MDF on parts of these light poles could have used some sanding, but as they are should work well enough. I may add some weathering effects later, but just plain, simple light poles is what they'll be for now.

Next up on my hobby list: Are the new map tiles going to work out?


4ground gaming miniatures studio miniatures

Mini Church

02.07.2021

In the miniature world of terrain and buildings, I've got a lot more to make than just the 4Ground mall. The mall is a huge, multi-year project that I keep telling myself that I'm in no hurry to finish. If you base that timeline on when I first started purchasing pieces of the mall back in Oct 2019 I'm taking that timeline to heart. I'm in nor hurry, no reason to rush, and I want to enjoying the process of putting it all together. With that comes a need to take a break and do something different every once in a while.

One of those "not-mall" buildings I picked up was Rev Johnson's Church. It reminded me of the kind of churches Pawpaw preached at. This is also one of those buildings I want to customize depending on (1) how it turns out and (2) if the customizations I have in mind will actually work. They're not big customizations, so don't get too excited. First up, though, is putting the kit together.

And that gives you the basic church. There's fencing and a cemetery included in this bundle, but I'm saving that for another time. With the final result here, I think my little customization ideas will work. Part of those ideas needs the garage to warm up enough for the 3D printer to be cooperative.

And that's how my hobby timelines get strung out.


4ground gaming miniatures scenery

Unthemed Batch O Minis

01.28.2021

Another random batch of non-game affiliated minis. Like the Scooby Gang, this batch was also cast by Hasslefree Miniatures. I'd forgotten how much I like their casts. There's the right amount of detail, usually there's no too much in the way to get all of he (important) details painted.

A little more careful prep helped. I washed the metal minis before doing anything - one of those steps I skip 95% of the time. I primed on a humid day. It may have actually been drizzling outside, but the primer stuck well enough and didn't run. I mainly stuck to contrast paints on these, too. I think contrast paints work well with fabric, although dark streaks covering large areas (backs, mainly) are more prone than I care for.

This was also my best batch of eyeballs. I read a Facebook post of someone explaining how they paint eyes and I was already pretty close to that method. Since I normally prime everything white, starting at the whites of eyeballs should be a natural thing for me to do. After priming, paint the pupil. If the pupils don't line up, paint white over them and try again. If the pupil spills over - it's a little hard for me to type that with my eye phobia - just clean up the part(s) you don't want. I've gotten better at going over mistakes along the way, normally dabbing a little white at whatever color has gone beyond its line. Cleaning up pupils that way, instead of trying to add those dots to eyes close to the final step, sounds much more feasible. And, it turns out, it is!

I again veered away from making everyone white, which for some reason makes me a little nervous each time. Skin tones came through a little mottled, but that was for everyone. Skin was giving me a fit on this go around (again). Overall, it turned out to be a good batch. Outside of the prep work of washing and priming, it only took a day to paint everything. A day of PTO I was taking, and it was an enjoyable and relaxing day at that.

Here's a who's who:
Vince - Kind of a biker gang guy, with his sleeveless leather vest-jacket.
Sgt Spanner - Basically a Capt America knock off.
Kristen - I'm not sure what she's supposed to be doing. Maybe hiding a gun behind her hair?
Frank Cisco - It's really Dirty Harry. Punk.
General Sinclair - Always in need of another unarmed military looking guy. "General" seems ambitious though. He looks more like a colonel, or maybe a major, to me.
Gina - Hasslfree has 2 sculpts for Six from Battlestar Galactica. This is one. The other is still in my TBD pile.


gaming miniatures Hasslefree

Be Kind, Please Rewind

01.25.2021

The latest mall addition is a good old fashioned video store - Blockbuster!

When putting away the Scooby gang last time, I noticed my box for non-game specific minis is almost full. But fear not, I've got an empty box sitting at the ready.


4ground-mall scenery

Those Meddling Kids

01.21.2021

For my first batch of painting for the year, I went for a group of minis which I don't really know how long I've had sitting on a shelf. Quite a while, at least. The Hasslefree version of the Scooby Doo gang. Each has a different name so as to not infringe on any copyrights, but the key there is that without the correct colors it's not Scoob and the gang. Although I learned, based on my color choices and reference pics to the cartoon, that just getting close to the right color combinations is good enough for people to recognize who it's supposed to be.

There was really nothing special about this batch, save for I think these are the best eyes I've managed. Brush-felt tipped pens, with ever the slightest of touches, while paying close attention with my magnifying headband glasses ended up being the right combination - this time around. I also ended up using those brushes, think of it as painting with ink, to touch up hair and some clothes parts.

The Mystery Machine in the last pic is a Jada 1:32 Die Cast toy I came across at Wal Mart. Normally 1:48 and maybe 1:42 will work with 28mm, so this is a big accessory. The van is just under 2 inches wide, which is what most vehicles in 28mm treat as 1 lane. For $10, it's close enough to work. There's a resin van and add-on decals you can get for the right scale, but again, for $10 this was a quick prop to add in.

Only I will really notice, but I'm not going to add my spreadsheet update any longer with each painted mini post. Any gains or losses are hard to notice unless you go back to the previous post, and I don't plan on getting done anytime soon. Maybe when a category of minis gets done I'll make a special note, but no more "0.3% more complete!" paragraphs :)

For next time, I'm still working on a Blockbuster Video store for the 4Ground mall. After that, I think I may work on a non-mall building while also finding another batch of minis to paint for when the mood strikes.


gaming miniatures Hasslefree

Blog Archive

As always, correct spelling is optional in any blog entry. Keep in mind that any links more than a year old may not be active, especially the ones pointing back to Russellmania (I like to move things around!).

Tags have been added to posts back to 2005. There may be an occasional old blog that gets added to the tag list, but in reality what could be noteworthy from that far back?

Blog Tags

3D Printer (26)
4ground (18)
4ground-mall (25)
action figures/toys (10)
airbrush (7)
Amazon (12)
antenocitisworkshop (11)
belt sander (12)
boardgames (76)
books/comics (19)
computers hate me (5)
conveyances (15)
diet (53)
dreams (7)
Foundry (2)
game dev (22)
gaming miniatures (168)
gaslands (10)
gastric sleeve (34)
Green Stuff World (2)
Hasslefree (6)
Hero Forge (1)
hobbies (99)
kevin smith (1)
mckays (1)
models (8)
mom (27)
moon light (5)
movies/tv/dvd (60)
ninja division (1)
pilonidal cyst (5)
plastcraft (2)
programming/interweb (41)
rambling (59)
random (359)
random maintenance (3)
reaper chronoscape (29)
renovation/remodelling (24)
road trip (26)
salesforce (1)
scenery (15)
studio miniatures (3)
ttcombat (12)
video games (51)
walking dead (30)
wargame foundry (3)
work (6)
wrestling (45)
zombicide (1)
zombie mall (23)