Made To Suffer - Expansion Name or My Painting Technique?

05.27.2019

Since the last batch of Walking Dead turned out pretty well, I decided to try the same route on another batch. 9 more primed, mainly 5 from the Made To Suffer expansion which WAS NOT ON MY PROGRESS SPREADSHEET. For someone who prides himself on organizational skills, that spreadsheet has been my bane.

I strayed from keeping to reference pics this time. This is obvious when looking at Bruce, who I neglected to make black. Besides not noticing, I still have a problem with those brown skin tones so I don't feel too guilty. In trying to up my painting game after becoming a little more confident with my "eyes looking close to the same direction" technique, I tried to give everyone eyebrows. Face detail, that's what I'm working on. Mixed results on that front.

Martinez, with the headband, was my hero to focus on this time and he turned out well. There was an errant dab of paint on his elbow when I was touching up something - I have no idea what. Instead of trying to get the skin tone to match back up, that dab turned into a recent wound with some extra blood laced scratches around it. I'm all about covering up mistakes with grime and gore, after all.

Dr Stevens was the one that turned out better than I expected. I tried to keep his coat Primer White, and mostly did, although one of the final steps on him was to apply an off-white drycoat to cover up some bleeding from other colors. Plus, the stark whiteness of the primer was a little too much.

It's never until I take pictures and look at the details that I see just how much better most people's painted minis look. If nothing else it shows that I'm looking at the right people to learn from.

A while back I posted a few pics of the 4Ground Tobacconists Shop that I wasn't very happy with. Nothing wrong with the kit, I just did a horrible job on it. This bothered my subconscious enough to ponder what to do, and after nigh on 2 months I have an improvement I'm not as disappointed in. The shop is now a semi-derelict building for lease. It even has graffiti (applied via clear mailing stickers). It's still not something I'm proud of, but now I'm not ashamed of it.

Over on the progress spreadsheet, taking into account that 5 of the minis from the expansion weren't present previously, there was another gain of 1% on the Realistic list. 251 painted minis, and 345 total. Mostly for the fun of painting. Why let games get in the way?

Next up - continuing progress on the Walking Dead minis, the Fear The Hunters expansion is up for priming. There's 5 minis in the expansion, so that leaves some room to see what else catches my eye to reach the target of 9 things to prime.


4ground gaming miniatures hobbies walking dead

More painting - Abraham and Friends

05.11.2019

When it comes to minis for the Walking Dead game, I try to find reference pics to paint by. I'm not good with color choices so going by what someone else has that already looks good helps. In addition, using a "good" template helps my skills along.

This time, I had 3 goals. The ever present first goal of "Don't glob on paint and make them suck" was foremost. Second was "try to make some eyeballs that don't look retarded." Finally, "Change up skin tones" was a direct result of the last batch needing too many coats of paint & wash to not look from pasty death to rotted death.

The packs of minis this time didn't contain 1 "Hero" and 2 zombies. I guess they've released enough zombies? Except for Zombie Duane, son of Morgan, Distraught Father, added in to Morgan's pack of 3, the packs I opened up all had 2 "Hero" minis.

Walking Dead reference pics (from Mantic Games) that I used for reference:

Over the course of 2 weeks, even though there were 9 minis lined up to paint, I eschewed the assembly line method of picking a color and using it on every mini that could use that color. Instead I did what (I've heard) works better - start at the bottom/hard to reach level of the mini and work up. Normally that means "skin". If a hand is holding something, that isn't necessarily true. I started with Abraham, for some reason I wanted this one to turn out the best, to make sure I took my time on. Skin, red/orange hair (easy to do with the Citadel orange wash), green camo clothes. Everything was something I'd done before, although camo painted uniforms were more of what I painted in the 80's and 90's.

Since I was trying to vary skin tones, thanks to the Juan Ton Soop incident of last month, there wouldn't just be a base skin tone and flesh wash applied. 4 black (African-whatever, I've never tried to be PC here, just ask Juan Ton Soop), 1 Latina (fine, a little PC), and the rest are normal white guys. I always have a hard time with black, as I'm wary of going too dark (covering up features) and often end up too light (hey, nice tan, bro). Even the white guys are normally too white, with me depending too much on the flesh wash.

Taking my time helped. When things didn't look right - of course the first 2 passes of my black guys were all too light - I tried to find a shade to LIGHTLY APPLY to see if it made things better. Most did. Some, of course, did not. By the time I was done, Jud was the only mini I wasn't at least halfway happy with. Jud's skin was too... sunburned is the best way to describe it. And there had been enough layers of paint and wash that he'd reached the tipping point of having enough detail showing to be presentable. When you don't make the cut, you get experimented on! Jud, welcome to the tattoo needle! The tattoo needle is really a pen tip, but that doesn't sound as ominous. Some light scribbles and Jud, whoever he is in the comics, is now a tatted up rough looking dude.

The rest stuck pretty close to the reference pics I was using. Abraham turned out the best, as I'd hoped. Eugene, holding a radio, ended up better than I expected. Almost everyone had eyes that ended up looking in the same direction. Morgan's eyes look a little weird, but I was trying to go for the "distraught/crazed" look and went a little too crazy. I knew my attempt to fix it would screw it up, so Morgan remains "super distraught and crazed".

For once I haven't noticed any obvious mathematical formula errors in the painting progress spreadsheet. I also haven't bought anything since last time. This means, for the first time in a long, long time, the spreadsheet shows PROGRESS! +9 painted! +1% progress!

There's another batch of Walking Dead minis awaiting priming so they'll be ready to paint when the mood strikes. It's rainy, humid day and I've learned that priming when it's raining leads to runny primer covering details. In keeping with the Walking Dead progress, I pulled out the Greene Family Farm scenery expansion and thought it might be nice to make their barn. There's also plenty of other, prep-work tasks I've got to keep me busy so I can have something cool to show later. Plenty to do!


boardgames gaming miniatures hobbies walking dead

Moon Light and Open For Business

07.08.2018

Once I saw Christian's Moon Light, I wanted a moon light. I saw that Amazon had 16-color moon lights. The lone review on that light stated it was problematic. With only 1 bad review I decided to take a chance and ordered one. It arrived, I charged it up... and the damn thing didn't work. There was another Amazon option that caught my eye - a newer model/print, and larger. So I ordered that one, as I needed a box to ship my return of the non-working light back in. It makes sense to me! The newer, bigger light arrived and it worked like a charm.

I'm not as good a low-light photographer as Christian, but it was fun playing with the different colors.

With the mini mart and coffee shop complete, it was time to add them to the cityscape of the zombie apocalypse (or whatever else might come along down the road). My regular, modular map tiles are 7.5" square(ish). The mini mart had a 6.5" square footprint, which would allow for a 1" leeway for space, maybe a sidewalk around the building. The coffee shop was 8" x 6", so it would overflow a little.

And that overflow option bothered me. I wanted a parking lot for these shops. I'd made some parking lot tiles for the map before, but they didn't really work. The spacing was all off. I opted to try to layout something using some multiple(s) of 7.5" that I could keep together instead of cutting into sections, and it would still work with the pieces I'd been using. After some fiddling, I settled on a 22.5" x 15" layout - it would fit on foam board that I already had, and it would give me enough room for the 2 buildings and a little parking. Even though I made everything in Paint Shop Pro using a 22.5" x 15" image, I split it into 7.5" squares for printing. Gotta love letter size paper. Everything printed out fine.

Learning my lesson from the Gaslands track where the glue I was using made the board bow, I taped the 6 pieces of printed map together to line everything up. From there, a light spray of (Locktite) adhesive on some foam board and it was stuck good enough for me, which is good enough for someone who's had glue problems lately.

And then, I had to play around with actually setting things up. New buildings! Moon light! I even remembered I had a star field for X-Wing that I could use as a backdrop!



I look forward to using more of Christian's ideas. Between the Walking Dead Lucille threat tracker and moon light, I've got to make sure he doesn't start charging me royalty fees.


gaming miniatures hobbies moon light ttcombat walking dead

Walking Dead Scenario #3

03.14.2018

After 11(ish) months of painting, making scenery, and actually playing through 2 scenarios, I finally wrapped up the Prelude to Woodbury solo missions by playing Scenario THREE. Yes, THREE. Roughly 1 game every 4 months. I freely admit the game play is an afterthought and excuse for me to make scenery and paint minis. To celebrate painting all (125) of my Walking Dead minis, I played a game. A game that needed 5 of those minis. Did I set up the basic game play area as described in the basic, rudimentary, solo play rule book?

Hell no I didn't just do that!

While I would only need 4 of my little map tiles for the required 15" x 15" play area, I wanted, nay, needed, the proper background with which to play against. Thus, another section of rural Potham, but less rural than previous games and setups, game to be.



With this fringe of Potham set, it was time to see if the Governor To Be could complete his prescribed scenario feat of capturing 4 walkers. The rules, as I read them, stated that 4 walkers had to be captured and loaded into the vehicle (see Police Truck at the bottom of the setup pics). To capture a walker, said walker had to be defeated in combat (score damage, not necessarily a headshot) which would make the walker go prone. Once prone, it could be dragged to the truck at a Sneak pace. While having a walker in tow, I could only defend and not attack any other walkers that came by. The rules also stated that walkers being dragged would make Noise. This is one of those rules I may have read wrong, especially since it was the first time I used the Noise rule, but Noise affects other walkers during the Action (first) phase of the turn. A player normally has 2 actions. As I wasn't the one actively making the noise, I decided that the Noise affect would happen at the end of the 2nd action. This would end up playing very heavily to my advantage. Also, the Solo rules have a special rule I ignore that raises the threat 1 at the end of every turn. I really don't like that rule, as it defeats my desire to sneak around and seems to just make the game (end on turns) faster.

Fluff: Brian, out to win the favor of those fools in Woodbury, has gone out to bring back more walkers to appease the folk during their arena games. 4 fresh walkers would be perfect to bring back. Brian grabbed a truck for his little adventure. Dragging walkers back by the nape of their rotting necks wouldn't be a good way to come back to the town gates. Plus, it'd be stupid. At best he could safely bring back 2. 4 is the way to go! And as luck would have it, he spotted 4 here on the outskirts of this little burb. Brian parked and got ready to bring some walkers home.

Turn: 1
Threat: 1
Fluff: Brian, armed with his pistol, decides to take a shot at the closest walker although there's a barricade in the way. He fires off a shot which hits his target but flies harmlessly through the dead flesh. The sound of the shot catches the attention of 3 walkers, with one of them advancing on top of Brian. With his guard up, Brian pistol whips the walker and knocks him down!
Game Details:

Turn: 2
Threat: 2
Fluff: After loading his first captured walker into the truck, Brian starts toward the next walker. He doesn't have to go far as one shambles toward him to attack. But Brian is on his guard and fights down this walker as easily as the previous one.
Game Details:

Turn: 3
Threat: 4
Fluff: With a grunt Brian loads his latest defeated walker into the back of the truck before capturing the attention of any other lurking walkers. Out of the corner of his eye he sees another walker getting closer.
Game Details:

Turn: 4
Threat: 5
Fluff: Taking a breath, Brian sneaks toward the walker. Trying to stay silent, he swings his pistol butt toward the zombie' head but misses. Out of instinct he brings up the knife that's in his other hand and fells the walker.
Game Details:

Turn: 5
Threat: 6
Fluff: Brian tosses walker #3 in the back of the truck - a nice little gaggle of walkers is growing back there. One more to go. Brian takes another deep breath as he readies for his final goal.
Game Details:

Turn: 6
Threat: 5
Fluff: One more walker appears and is on Brian before he knows it. Startled and out of instinct Brian fires off a shot from his pistol and hits the walker in the chest, knocking him down. Brian picks him up, the last of the group he set out to capture.
Game Details:

Turn: 7
Threat: 6
Fluff: Brian loads up the final walker. In the distance he sees a herd shamble by. It's time to crank up the truck and get back home before drawing any undo attention.
Game Details:

This was actually my second play through, as there were a couple of rules I was unclear on. The first time I won in 12 turns. There were a couple of things I did wrong as well as some die rolls going against me. This time I was successful the first time in each combat, which helped a lot. Looking back, I need to double check if picking up the prone walker to drag is an action since I ended up making it an automatic event. It also helped that Brian never had to waste movement dragging a walker back to the truck - he was always adjacent during combat. The helped both in saving an action per turn, and the walker was loaded before any Noise effects factored in.

Overall, still a fun little game.

Since I set up so much extra scenery for background, I went ahead and took some beauty shots. I had planned on more walkers coming into play via event cards, so instead of keeping them in the box to pull as needed I just set up a herd outside of play stocked up with zombies to pull. It turned out I didn't need any of them, but that's not the point.


boardgames gaming miniatures walking dead

100% Walking Dead In Color

03.02.2018

In May 2017 I decided I would concentrate on painting my Walking Dead minis and give myself a little focus beyond the random assortment of things I would pick to paint all willy-nilly like. Slightly less than a year later, I've managed to complete the Walking Dead minis that have been released through retail outlets at this juncture. Oh, trust me, there's a lot more coming.

Over the last couple of weeks I finished up the final 24 of 125 minis. That's how many minis (ha!) are in my Walking Dead collection. Looking at the first one I painted VS the last one painted... honestly, I can't tell that much of an improvement. I had a goal, and that goal is complete. I have more goals, I just don't know what order they need to be in yet.

Once again, these look ok when in play from a couple of feet away. Up close, geez. Not nearly as good as I thought when I was painting them.

And now the update I've been looking forward to:

 



Here's the latest hobby spreadsheet update!

Next up I'm going to finally play the 3rd mission/scenario from the solo Woodbury set. I've got 125 minis painted, and yet still only need 6 to play this scenario. But I'm in this for the toys and prep, not the game! After that will be a little break from painting proper as I work on a convenience store from TTCombat. The first commercial building in my zombie infested world!


gaming miniatures hobbies walking dead

Blog Archive

As always, correct spelling is optional in any blog entry. Keep in mind that any links more than a year old may not be active, especially the ones pointing back to Russellmania (I like to move things around!).

Tags have been added to posts back to 2005. There may be an occasional old blog that gets added to the tag list, but in reality what could be noteworthy from that far back?

Blog Tags

3D Printer (26)
4ground (32)
4ground-mall (40)
action figures/toys (10)
airbrush (7)
Aliens (1)
Amazon (12)
antenocitisworkshop (11)
Atlas O Gauge (2)
Batman Miniature Game (2)
Battletech (1)
belt sander (12)
Blood Bowl (4)
boardgames (77)
books/comics (19)
computers hate me (5)
conveyances (15)
diet (53)
dreams (7)
fallout (1)
Foundry (3)
Gale Force Nine (1)
game dev (22)
gaming miniatures (227)
gaslands (10)
gastric sleeve (34)
Green Stuff World (2)
Hasslefree (9)
Hero Forge (1)
hobbies (101)
Jailbirds Minis (1)
kevin smith (1)
Knight Models (2)
malifaux (2)
Marvel Crisis Protocol (2)
mckays (1)
models (9)
mom (32)
moon light (5)
movies/tv/dvd (60)
ninja division (1)
Pathfinder Deepcuts (1)
pilonidal cyst (5)
plastcraft (2)
programming/interweb (41)
rambling (60)
random (365)
random maintenance (3)
Reaper Bones (3)
reaper chronoscape (32)
renovation/remodelling (24)
road trip (26)
salesforce (1)
sarissa precission (2)
scenery (16)
studio miniatures (3)
ttcombat (12)
video games (51)
walking dead (36)
wargame foundry (3)
work (6)
wrestling (45)
zombicide (1)
Zombicide Invader (19)
zombie mall (23)