Web Exclusives

11.03.2019

I didn't mean to paint anything. Not really. I wasn't planning on priming a batch and then spending the week working through them all and trying to get them done. And I didn't do that. I primed some stuff I thought would be interesting to paint, and then I painted a little here and there when I thought about it. I didn't worry about "I have yellow on the brush, what all needs to be yellow?". I didn't rush through the final color that a mini needed to be called finished. Just some nice, relaxing painting.

I had purchased some "web exclusives" from the Mantic website. I'd shown my batch of points I sent in previously on a post I'm too lazy to link to. A special Abraham and Negan were bought. There was also Rick's Badge to replace the cardboard 1st player token - I play solo, so why do I need a 1st player token? A bag of guns rounded out the web exclusives. Those last 2 just sounded like they would be fun to paint. What else am I going to spend Mantic Points on?

I've been grabbing Zombicide minis for test painting (those details are really too boring to go into). Amidst all that grabbing I came across a couple of clutter minis. Mattresses piled on top of random crap. The cast was good enough to actually tell the distinct parts in the pile. Those could be fun to paint! As such, they made it into the batch to be primed.

Even though it's been rainy and humid, I really wanted to prime everything up to paint. I waited until the rain had quit for a day, but even then you can see that the primer ran and pooled a little. Some day I'll find the right patience to wait until the weather cooperates, or I'll switch to airbrush priming.

Over the course of a week I painted a little here and there. Taking my time, plus my $10 magnifier glasses from Amazon, really makes a difference. The 2 clutter minis were 95% contrast paints. The badge went through a few transitions of Tin and Gold before ending up with whatever it is now. The letters on the badge were fun. The letters are recessed and I just filled them with Nuln Oil and a properly small-tipped brush.

I've got to learn to work better with light colors, especially white. The white I put on for t-shirts is too thick. Thin layers weren't sticking to cover errant color strokes underneath. Thick (enough) layer shows mottled brush strokes. Going over the thick layer with just a wet brush helped, but it's still something I need to work on.

This is my 1st try at a new camera setup. There's likely to be lots of iterations on tweaking before settling on something for a while.

Normally I would mention something about progress here, but to be honest I've done more than what shows up on my little spreadsheet with things that don't count toward the progress I track. The case in point is that I painted parts of almost a dozen Zombicide minis as color tests for Star Trek Adventures. I've got a painting guide, but I don't trust it 100%. I don't even trust it 80%. For my peace of mind, I decided to test (and DOCUMENT!) color options before committing to the Trek figures. This is something that I wanted and needed to do, but I've got nothing shareable to show for it. Eventually there will be some Trek minis to show, but not now.

The 4 Walking Dead minis shown above were added to the Painted total, but they weren't in the To Be Painted total before. I believe that is a net gain of 0.

Permalink gaming miniatures hobbies walking dead zombicide

Bikers & Crows

10.19.2019

Pictures with no context. That's what this batch is. There was a sale on an expansion - The Others: 7 Sins - Sons of Ragnarok. Bikers, with some kind of game affiliated backstory that I don't know and will never pay attention to. A box of bikers for around 12 bucks was a good enough deal for me to jump on. The zombie apocalypse could probably use some bikers.

While raiding the bajillion Zombicide minis I've got for use as test subject (more on that farther down) I came across crows. I thought it would be neat to paint some crows so I pulled out a few (there's 4 or 5 per stand). After the fact, painting crows is boring. Black paint is too dark and covers up all the details. Various shades of black/grey with various types of highlights and drybrushing - all boring.

Normally, down here, there would be a painting progress update from the Excel file I keep up with all of this stuff in. Not this time, though. The section of the spreadsheet I clip to show is only on the minis I think I'll make long term progress on, which is roughly ¼ of everything. The minis painted this time fall into that other ¾ that's there, I just don't pay much attention to it. 10 things painted, no stats to show for it.

The next things I'm painting are similar. I'm prepping to paint Star Trek minis, and I have to get the color/shades right. Once you factor in primer color, washes, contrast colors, suggested colors, etc, I'm not 100% sure which direction to head. As such, some of the Zombicide 600+ mini masses are volunteering to be color tests. I'm not planning on any of these that I paint to be saved/usable, I just want a red shirt to be the Mr Scott red shirt that I've seen all my life. Is that too much to ask?

Yes, it probably is.

Permalink gaming miniatures hobbies

Do minis have estrogen?

10.09.2019

This batch is tagged "CleavageFest 2019" since Daniel pointed out "that's a lot of cleavage". 3 of them have no cleavage at all.

Yet again I've managed a "all but 1 from Reaper Chronoscope" batch. This time I was going to focus more on taking care of finer details (ie don't rush through whatever paint color is on the brush) and play around a little with the bases. If ever my theme of "finding minis to paint regardless of ever using them in a game" was present, I'm pretty sure it's here.

• Takoashi University Study Hall - The last of the Ninja Division sale. I'm not sure if I missed it in the package or it wasn't included, but this mini is missing half a right arm. I didn't even notice until I was 95% done and started wondering how those books were magically sticking to her front.
• Natalia, Female Secret Agent - I like this one so much I purchased 2 of them and didn't know it until I was pulling minis to paint.
• Gretha, Female Sniper - the gun's as big as she is, but the sculpt reminds me of a 3D figure I was using for Workshop Games. I have to remember to go through old images and see if I'm making that up.
• Bonnie, Futuristic Heroine - I've done one of these before (I think) with more of a Milla vs Zombies feel.
• Dee Dee, Astro Girl - instead of going the obvious route of white and/or shiny cloth, I just stuck to my "wash as paint" method.
• Farrah, Sci Fi Heroine - I thought I would try my non-white realm of skin tone on a mini named "Farrah",
• Rosie Johnson, Chronotech - armed with a wrench.
• Veronica Blaze - for some reason I think she's got scavenged Stormtrooper armor.

My focus on this batch was going to be "doing better". I think my skill level is up to mediocre, where on average my minis look fine from about 4 ft away. Now to challenge myself to raise my skill to where they look fine from 3 feet away. The first thing that's going to help with that is Glam Hobby h6902B Head Mount Magnifier with LED Head Light Bracket and Headband, 5 Replaceable and Interchangeable Lenses: 1.0X, 1.5X, 2.0X, 2.5X, 3.5X. That's what's it called - I've just been calling them magnifying glasses. I've tried various magnifying helpers in the past and none have worked for me until this pair (set?). I've stuck in the 3.5x lenses and I can see a lot better when holding things up close to paint. They fit just right for me where I can shift my view above/below the lenses and see that I need to (paint, water to splash the brush in). I'm honestly amazed at all the spots I can see where I've been missing the first coat of paint along with those spots that could really use a 3rd coat of paint. And I can finally see where to put those black dots for eyes!!!! Holding my hand steady enough for that is a whole 'nother story.

Technique-wise, I used mostly Citadel Contrast paints and various washes that I normally stick to. I found, to my chagrin, that I tend to have the best luck using a Citadel brush for detail work - I may end up getting a couple more of various types just to see if I found a magical brush or if their line is just better suited to me. I used some Secret Weapon bases for a few of these minis. "Not on cracked earth" bases are the ones to keep an eye out. For the cracked earth, instead of glopping it on after the mini was painted I opted to try out adding it in before priming. Oh, and water effects. I do so love adding water to stuff, so I tried filling in some gaps on bases with water and I like the way it ended up. There's 1 leaky pipe, with rust.

The true test mini of the batch was the anime-styled Takoashi University Study Hall. This was especially true once I noticed half an arm was missing. Weird, Joker-inspired color scheme on the clothes so I could test out washes + contrast paint overlaying differently. I wondered if I could make "sand" with the base - sand doesn't crack so "kinda" would be the answer there. Still keeping with playing with water, I went for a gentle wave settling on the beach - and got another "kinda". Even though this mini will likely never again see the light of day, I consider it a testing success as I tried some things out and didn't completely hose it over to the point I'm ashamed.

Along with "doing better", looking at endless pictures on gridded cutting mats is boring. As I thoroughly enjoy Christian's pics I thought it about time to change up my background. I've got plenty of stuff to use as background. Enter an Infinity building that I'm pretty sure I purchased on Black Friday 2015, and then managed to paint at some point in the last 2 years.

Continuing on the progress chart:
- Painted 294 to 303 (+2%)
- Reaper Chronoscope Painted 103 to 111
- Ninja Division 100% complete (all 2 of them)!

Next up to be primed is a batch that won't make the above progress chart. Miniature Market had a sale on a biker game expansion from a game I'd never heard of. The minis looked cool so I got them. Now, instead of letting them be forgotten on a shelf for a couple of years, Last In First Out rules come into play. Until next time (maybe a week or so)!

Permalink gaming miniatures hobbies reaper chronoscape

Hasslefree Tony Represents

09.28.2019

Now for the "after knocking the rust off the paint brush on the previous batch, how'm I doing" batch of minis. Or "I'm enjoying vacation."

After some previously painted duplicates in the last batch, this batch of Reaper Chronoscope (plus a Hasslefree sculpt) minis was still an eclectic assortment that would never make sense in the same game, yet would give me a good mix of easy + test out my skills.

• Sasha Dubios, Time Chaser. One of those minis I bought just because I thought it looked cool.
• Borris Barayev, 5 Suns Smuggler. I think this one just goes with Sasha.
• Lobo Sanchez, Bandito. Picked this one up along with a batch of western themed minis.
• Dr John Watson.
• Kawa, Sumo Wrestler. Where in the zombie apocalypse will a sumo fit in?
• Townsfolk: Innkeeper. Another one of those plastic sculpts.
• Agatha Fox. Same complaint as above.
• Physician. More of an old timey town doctor.
• Psychologist. The Physician needed a drinking buddy to talk shop with.
• Tony (from Hasslefree). Tony seems to be chilling somewhere around a golf course.

I mentioned last time about Reaper plastic sculpts not only not needing primer, but not working well with most primers. I didn't read that little tidbit of information until after I had already primed this batch. Normally I use white Fine Detail Tamiya primer. On Reaper plastic this primer covers with a gloss, pools into too many details, and the gloss keeps the follow up paint from sticking like I'm used to. In this batch, Agatha Fox was primed white and looks like crap. The Physician was also primed white, but turned out a little better - maybe because I mainly stuck to using Citadel Contrast browns? I went the some route with John Watson, a metal figure, and the results look about the same. Maybe it's got something to do with how small the Agatha Fox mini is? The Innkeeper got grey primer which seemed to work out ok.

The bases on these plastic sculpts is a little annoying. The base is part of the sculpt, and looks like it should be a pile of dirt/rocks/uneven ground. For some extra stability I glue these on cheap, plastic 1" poker chips which also gives me a little more base to work with when it comes time to finish off the mini. I didn't know what to do with the Innkeeper - he's cleaning a glass, so he shouldn't be outside in the grass or standing in mud.

This batch also gave me a chance to play around some. I tried to get something besides "white guy" skin on the sumo. I didn't mean to go to Trump Orange, but I knew from previous experience that once my skin tones skew to oranges it's not going to get any better. I tried a little more Not White Guy on the Innkeeper and the Psychologist. I'm not sure how much they'll count as Black Guys....

Borris & Sasha got my post-apocalyptic juices flowing - leather and metallic what-not! Lobo Sanchez was my surprise favorite. I found a reference pic where people were doing really good jobs on patterns on the blanket draped over his shoulder. Had I planned out a pattern it might have ended up better, but eyeballing what was working AND not working, it turned out better than I expected.

Over on the painting progress chart:
- Painted 281 to 294 (+1%)
- Reaper Chronoscope Painted 98 to 103
- Reaper Savage Worlds Painted 7 to 14 (a couple of old painted minis got skipped on the updates in the spreadsheet)
- Hasslefree finally has 1 painted!!!!

After painting nothing for almost 3 months, I get busy during a weeks vacation and finish 19 minis, with another 9 primed - and I doubt I'll finish them before going back to work on Monday. While these 2 batches weren't perfect, they weren't overly frustrating. They were just the amount of fun they needed to be!

The next batch, already primed, is all Chronoscope, all metal, all female. I picked up a pair of magnifier glasses that I'm going to try out and see if they help with seeing all these details I notice I'm missing after the fact. I haven't had much luck with magnifying glasses in the past, but these were recommended by multiple people in some Facebook group posts. We shall see how it goes.

Permalink gaming miniatures Hasslefree hobbies reaper chronoscape

9 Minis, and the Start of Some Contrast Paint

09.26.2019

After inadvertently taking the summer off, I finally picked up a brush and painted some minis! I took the opportunity to take a week off from work and decided that would take a staycation and do lots of little things around the house that I've been putting off, yet wanting to do. At the top of the list: Paint Some Minis!

I knew there would be a little rust on my techniques, so I grabbed some random Reaper Chronoscope "ehhh, I think I may have already painted a copy of this". Nothing special about this batch, save a couple were plastic instead of metal. From the Reaper website:

• 50090 - Townsfolk 2: Jock, Nerd, Chick. I've painted this trio before, but I can't remember what color scheme I used.
• 50266 - Zombies: Doctor, Nurse, Patient. I thought I'd painted these before, but the anatomically correct zombie patient with extra growths on his butt did not ring a bell when I saw it up close. And that would have left a bell to ring.
• 59029 - Baron Simon LaCroix
• 80073 - Pulp Era Professor. A plastic sculpt, of which there is another still sitting in a box.
• 91011 - Femme Fatale. Another plastic sculpt, which feels amazingly small.

I've mentioned the Reaper plastic minis because I learned something much, much after the fact (so far after the fact that I've almost completed the next batch of painting where I could have really used this tidbit of information). Reaper plastic minis do not have to be primed. In fact, they don't like to be primed. I now know why my primed plastic Reaper minis are ungodly shiny, and the primer doesn't hold paint like it should. IT'S NOT SUPPOSED TO.

Beyond that, this was a nice batch to get back into painting with. No color guides to hold true to. Nothing I could really do "wrong". This was my first use of Citadel Contrast Paints - and I'm still figuring them out. While I've managed to get a really good technique of painting 90% of a mini with washes, that same technique doesn't work with contrast paints. Not yet, at least.

Something I learned which I don't want to admit is that I tend to do better detail work with the Citadel Detail brush. I've tried cheap brushes, over priced brushes, and way overpriced brushes, but never really given Citadel brushes a chance. After painting the mostly-red varsity jacket (red paint is hard for me to work with) and the Christmas-flavored Baron LaCroix, I've got to say I like that Citadel brush. I'm not even sure when or where I got it, but I might have to pick up another.

Nothing really noteworthy stood out with this batch. I half-assed it on the bases while trying for something different. I don't really like what this different turned out to be. But that's ok - I know not to try this again.

It's been long enough that it's time to introduce a couple of new tweaks to the paint progress spreadsheet. The rows are reorganized to just show what I might actually work ok. The real spreadsheet still has it all, but no need to keep copying 20 rows that never change. For fun, I added a % Done for each category. Once again the base numbers changed a little - this is really a set of 3 and not 1 mini, oops. This also skewed the numbers on some previously painted minis. Overall an increase from 37%(269) painted to 39%(281) painted.

I really need to make some type of "progress over time" chart to show progress at a glance.

I mentioned another batch almost finished, so another update should be happening in the next couple of days - base, flock, and sealant drying takes 1/2 the time. And I might have another batch teetering on the brink of priming after that.

Permalink gaming miniatures hobbies reaper chronoscape